Energy-saving single-motor drive roller press
Source: Contributor: Release time: 2017-07-10
在粉磨系统中安装辊压机，可以提高整个系统的生产效率，产量可以增加50-100%。 High output: Installing a roller press in the grinding system can improve the production efficiency of the entire system, and the output can be increased by 50-100%.
使用辊压机比传统粉磨方式可节能25-50%，因采用单动力传动（只需一台电动机），通过一组过桥齿轮联动系统传递到动辊，相对于同型号的辊压机又可节能40%以上。 Low power consumption: using a roller press can save energy by 25-50% compared with the traditional grinding method. Because it uses a single power transmission (only one motor is needed), it is transmitted to the moving roller through a set of bridge gear linkage systems, compared to the same model. The roller press can save more than 40% of energy.
辊压机结构简单，体积小，重量轻，占用空间小，可以节省土建投资，同时也便于对原有粉磨系统进行改造。 Provincial investment: The roller press is simple in structure, small in size, light in weight, and takes up less space, which can save investment in civil construction and also facilitate the transformation of the original grinding system.
物料在挤压辊罩内，有害粉尘不易扩散，同时由于近乎无冲击发生，故辊压机的噪音相比球磨机小很多。 Good environment: The material is in the squeeze roll cover, and the harmful dust is not easy to spread. At the same time, because there is almost no impact, the noise of the roller press is much smaller than that of the ball mill.
辊面堆焊耐磨层：硬度可达HRC55以上，能使用6000-8000小时（相当于一年左右）。 Long life: roll surfacing wear-resistant layer: hardness can reach HRC55 or higher, can be used for 6000-8000 hours (equivalent to about one year).
完善了入机异物的避免装置。 Strong resistance: Improved device for preventing foreign matter entering the machine. The moving roller can freely avoid hard foreign objects entering the machine, and solves the problem of severe wear of the roller due to a transmission failure of the double transmission roller press.